How to Fix Path Issues in Jurassic World Evolution 2: A Complete Troubleshooting Guide
4 min read
Jurassic World Evolution 2 is an immersive park management simulator that allows players to build and maintain their own Jurassic World. However, one common challenge that can halt progress and disrupt the park’s operations is pathing issues. Whether it’s confused guests, disconnected buildings, or illogical navigation, path problems can cause significant operational failures. This complete troubleshooting guide will walk through the common causes of path issues, provide effective solutions, and ensure your park runs as smoothly as possible.
Understanding Path Systems
In Jurassic World Evolution 2, paths are essential for connecting structures, enabling travel for guests and staff, and ensuring the efficiency of operations. The game uses a node-based pathing system, which means paths need to be properly linked for the AI to recognize connections. If a building or enclosure appears “disconnected,” even visually connected paths may actually be broken at a data level, which the AI interprets as inaccessible.
Common Pathing Issues and Fixes
1. Buildings Not Connecting to Paths
This is the most frequently encountered issue in the game. Even if the path appears to be touching a building or facility, it might not actually be connected in a way the game registers.
- Solution: Zoom in closely and check whether the end of the path is touching the actual entry point of the building. The door area of most buildings needs to be precisely aligned with the path node.
- Try deleting the last segment of the path and reconnecting it precisely to the path node area in front of the building.
2. Warning Indicators or Disconnected Facility Alerts
You may see warning icons above certain buildings indicating that guests or staff cannot reach them, even though paths appear to be in place.
- Solution: Make sure the path leading to the facility is continuous and there are no gaps, even small ones. Gaps can occur from overlapping terrain or when pathing across uneven ground.
- Flatten the terrain beneath the paths using the terrain tools to create a level surface, then re-lay the path.

3. Inaccessible Enclosures or Viewing Platforms
Sometimes viewing galleries or ranger access gates appear to be attached to an enclosure but remain unusable or unvisited by guests and staff.
- Solution: Check that there is a continuous guest path from the park entrance all the way to the viewing platform. Similarly, ensure ranger teams have roads that reach any pens or gates they are expected to service.
- Rebuild or reposition access gates if necessary. Sometimes deleting and re-adding the gate at a different location resolves pathing confusion.
4. Broken Path Loops
Circular paths or loops sometimes fail to recognize as complete even when they seem visually connected. This can cause guests to walk only part of the loop or ignore certain routes entirely.
- Solution: Break the path at various segments and reconnect, ensuring each node properly overlaps. Loops work best with short path segments rather than large sweeping curves.
5. Incorrect Road Types or Path Variants
Jurassic World Evolution 2 includes different path types, including wide guest paths and staff paths. Using the wrong type can lead to connectivity and routing issues.
- Solution: Always use the correct path type as required by the building. Guest facilities need guest paths; staff minuses or maintenance-only areas require staff paths.
- Convert the path by selecting it and replacing it with the correct type.
Advanced Troubleshooting Tips
Use the Map View
The Management View in the game allows players to see heat maps and connectivity. Paths that are correctly connected to the network will typically light up in this view.
- Use the guest comfort, shelter, and path coverage views to see if your layout logic matches actual effective coverage.
Layer Your Layout
When space is an issue, layering your layout with bridges or multiple levels can help—but the pathing logic must remain player-friendly.
- Try to keep important facilities on the same elevation. While aesthetic elevation changes are nice, they often complicate pathing logic.

Restart and Reconnect Facility Chains
Sometimes a pathing issue isn’t fixable until you remove and re-place key structures. This resets the internal linkage system.
- Consider deleting and rebuilding any affected guest facilities.
- Save your game before making major changes, and experiment with different connection points.
Preventing Future Pathing Problems
- Plan your paths before placing structures. Consider future guest traffic, staff access, and aesthetic flow.
- Use terrain tools proactively. Always level terrain before laying long or complex path routes.
- Test early and often. Periodically check guest flow and alerts. Fixing smaller issues is far easier than overhauling a fully built-out area.
Frequently Asked Questions (FAQ)
- Why are guests not reaching certain attractions even though paths exist?
- Guests require a fully connected guest path line from the park entrance to any attraction. Breaks or unrecognized connections can prevent access even if the path appears continuous.
- Can staff paths connect to guest paths?
- No. Staff and guest paths are recognized differently by the system. You must use the designated path type for the corresponding building.
- Why does flattening terrain help with pathing?
- Path nodes may not align correctly on sloped terrain. Flattening helps ensure that paths connect cleanly and increases the likelihood of valid connections.
- What’s the best way to test if a path works?
- Use Management View to visualize guest traffic. If an area receives no foot traffic or a warning icon appears, the path is likely invalid.
- Is there a maximum length or complexity for a path?
- There is no official maximum, but overly complex paths, especially those with too many loops or elevation changes, are more prone to breaking.
Pathing is a critical component of creating a fully functional and guest-friendly park in Jurassic World Evolution 2. By understanding how the system works and applying the solutions outlined in this guide, players can ensure their facilities are fully connected and functioning as intended. Attention to detail during construction, frequent use of map views, and regular testing will help avoid the most common pathing mishaps.