How to Reset Schlage Keypad Lock

You just bought a Schlage keypad lock or maybe you’ve had one for a while. Either way, you’re at the point where you need to reset it. Maybe you forgot the code, moved into a new place, or just want a fresh start. Don’t worry—it’s easier than it sounds, and we’ll walk you through it step by step!

TLDR: Resetting Your Schlage Keypad Lock

Resetting a Schlage keypad lock is simple. First, find your Programming Code in the user manual or inside the battery compartment. Then, follow a few button presses to erase old codes or set up new ones. If you lost the code completely, you can do a full factory reset by pressing a button sequence after removing the battery. Easy breezy!

Types of Schlage Keypad Locks

Before we dive into the reset process, let’s make sure we’re talking about the right kind of lock. Schlage makes a few different types of keypad locks. The most common ones are:

• Schlage BE365 – A basic electronic deadbolt.
• Schlage FE575/FE595 – Lever-style locks for doors without deadbolts.
• Schlage Connect – Smart lock with keypad and Z-Wave technology.
• Schlage Encode – Built-in Wi-Fi smart lock.

This guide will focus mostly on the basic models like the BE365, FE575, and FE595. If you’ve got a smart lock, some steps will differ slightly but don’t worry, we’ll explain both.

What You’ll Need

Before you start resetting anything, gather these items:

• A Phillips screwdriver
• The original Programming Code (usually on a sticker on the user manual or lock)
• Fresh batteries (just in case)

Option 1: Change User Code (Without Resetting)

If your lock is working just fine but you want to change the user entry codes, you don’t need to reset the whole thing. Just follow these steps:

1. Enter your 6-digit Programming Code.
2. Wait for the flashing orange light and 3 beeps.
3. Press 1 on the keypad.
4. Enter the new 4-digit code.
5. Re-enter the new code to confirm.

That’s it! Simple, fast, and no screwdriver required.

Option 2: Factory Reset (When You Forgot the Programming Code)

Things happen. If you’ve lost the Programming Code, the only way out is a factory reset. This will wipe all codes and bring your lock back to “new-from-the-box” settings.

Here’s how to reset your Schlage keypad lock:

1. Take off the lock’s interior cover using your screwdriver.
2. Disconnect the battery.
3. Press and hold the Schlage button.
4. While holding the button, reconnect the battery.
5. Keep holding the button until the green check lights up—usually for 10–15 seconds.

Now, your lock is reset to factory settings. It will use the original Programming Code (check your manual, or look inside the lock behind the battery).

How to Add a New User Code After Reset

Once your lock is reset, it doesn’t know anyone—yet. So you’ll need to add a code to enter the house!

1. Enter the 6-digit Programming Code.
2. Wait for the light and beeps.
3. Press 1 to add a new user code.
4. Enter your desired 4-digit user code.
5. Re-enter the 4-digit code to confirm.

Now any time you type that 4-digit code on the keypad, the lock will open like magic!

Changing the Programming Code (Optional But Handy!)

If you’ve reset the lock and want to change the programming code (from the default one), you can!

Follow these steps:

1. Enter the current 6-digit Programming Code.
2. Wait for the orange light and 3 beeps.
3. Press 3.
4. Enter your new 6-digit Programming Code.
5. Re-enter it to confirm.

It’s a good idea to keep this code somewhere safe (but not taped to the door—come on now!).

Schlage Smart Locks: Extra Steps

Have a Schlage Connect or Encode smart lock? The reset steps are a little different. Here’s a quick guide:

For Schlage Connect:

1. Remove battery cover.
2. Disconnect battery.
3. Press and hold the Schlage button.
4. Reconnect the battery while holding the button.
5. Wait for the green check and beep. You’re done!

For Schlage Encode:

• Go to the app and remove the lock from your account first.
• Physically reset by pressing the reset button inside battery area for 10 seconds.

Helpful Tips & Tricks

• Write down your Programming Code and keep it safe.
• Use user codes that are easy for you to remember but hard for others to guess.
• If your lock isn’t responding, replace the batteries first.
• Don’t use obvious codes like 1234 or your birthday.

FAQs

Q: I don’t know the original Programming Code. What now?
A: You’ll need to do a full factory reset. The lock will then use the original code, which is on a sticker (usually behind the battery pack or on the original manual).

Q: Can I add more than one user code?
A: Yes! You can add multiple user codes—some models allow up to 30.

Q: My lock is beeping but not unlocking. Why?
A: Low batteries are usually the issue. Try replacing them with fresh ones.

Q: Can I reset just the user codes without a full reset?
A: Yes! Enter the Programming Code and press 6 to delete all user codes.

You’re Now a Schlage Reset Hero!

Resetting a Schlage keypad lock might seem scary at first, but it’s really just a few button presses and maybe a battery dance. With the steps above, you’re the master of entry codes, glowing green checks, and beep-beep success.

Now go out there and unlock your day—the Schlage way!